UFS 2.0 Protocol Analyzer PGY-UHS II Protocol Analyzer Prodigy
*Comprehensive Protocol Analysis using Multi-View
PGY-UFS Software offers multi-view MPHY view, UniPRO view and UFS View. Each view lists the respective
protocol packets and its details with correlation of each layer for easy debug.
*Key features and benefits
- Supports version MPHY 3.1, UniPRO 1.61 and UFS version 2.1
- Supports PWM G1 to G7 and HS G1,2,3 A and B Series
- Supports one/two data lanes (2 TX and 2 RX)
- Solderdown active probe provide high signal fidelity
- Decoding at MPHY, UniPRO and UFS layer
- Trigger based on MPHY, UniPRO, UFS layer packet content
- Supports triggering in PWM and HS data rate speeds
- Flexibility to upgrade the hardware firmware using GbE interface provides easy field up gradation of FPGA firmware
* Powerful Trigger Capabilities
* UniPro Protocol Layer view
PGY-UFS-PA UFS Protocol Analysis offers multilayer of protocol view with flexibility to link all views for easy correlation of data. Selected packets details are displayed in a format which is similar to specification document format for easy correlation.
This view provides bit level information to analyze the communication between UFS host and UFS memory.
* UFS Protocol layer view
UFS layer view has UFS view and UFS Frame view. UFS view list all the UFS packets and UFS Frame view provides selected packets decoding at UFS packet format.
* Specifications
Data Rates Supported | PWM G1 to G7, High Speed Gear 1, Gera 2, and Gear 3 A and B Series |
Link Width | Configurable for 1TX/1RX or 2TX/2RX |
Probes | Solder Down Active Probes / SMA Probes at probe tip |
Protocol Decode | MPHY, UniPRO and UFS layer |
Trace Capture Size | Supports Continuous streaming of Protocol data to Host computer SSD/HDD. |
Trigger | Based MPHY, UniPRO and UFS Packets |
Front Panel Connectors | Interface for Active probes. Trigger in/out SMA connectors |
Interface for Host Computer | USB3.0 and Gigabit Ethernet interface |
Host Computeer Requirements | Windows 7/8/8.1/10 64bit OS, It requires RAM of minimum 8GB but the product would give a faster response for 16GB. The minimum storage capacity of 1GB should be available in the hard disk drive. User can use more storage based on trace storage requirement. Display resolution of the monitor is 1024*768. Host computer should USB3.0 or Gbe interface. |
Dimension (W * H * D) | (20.5 * 5 * 25)cm |
Weight | Approx. 2.5kg |
Power Requirement | 12V, 3A DC Power Supply (AC/DC Adapter Supplied along with Analyzer) |
* Trigger Specifications
Stack | Protocol Layer | Packet Type |
UniPRO | Link Startup Sequence | Trig_UPRO0 |
Trig_UPRO1 | ||
Trig_UPRO2 | ||
PHY Capability Adapter Packets (PACP) | PACP_PWR_reg | |
PACP_PWR_cnf | ||
PAC_Cap_ind | ||
PACP_Cap_EXT1_ind | ||
PACO_EPR_ind | ||
PACP_TestMo de_req | ||
PACP_Get_req | ||
PACP_Get_cnf | ||
PACP_SER_req | ||
PACP_SET_cn f | ||
PACP_TEST_DATA_0 | ||
PACP_Test_DATA_1 | ||
PACP_Test_DATA_2 | ||
PACP_Test_DATA_3 | ||
Data Link packets | SOF | |
EOF | ||
EOF_ODD | ||
EOF_EVEN | ||
COF | ||
AFX/NAC | ||
Traffic Class 0/Traffic Class 1 | ||
UFS | UFS layer Packets | NOP IN |
NOP OUT | ||
Command | ||
Response | ||
Task Management Request | ||
Task Management Response | ||
Ready To Transfer | ||
Query Request | ||
Query Respond |
* Analytics
PGY-UFS-PA UFS softw are would allow an engineer to quickly view the error conditions.
· Errors reported in packets
· Linking the error bit info to packets
· CRC errors
· Gear changing information
· Lane width
· Credit information
· Performance Analysis of packets